LET ME TELL YOU ABOUT US:
We need a design for a digital graphic that will go on the outside of a fiber drum. This drum will be used to display, in bulk, CB Antennas at truck dealers.
HERE IS WHAT WE NEED:
This display is to go into truck dealers across the US. So make sure the design fits the "truck driver" profile. It should be "edgy" but current.
I have attached a rough sketch, but you may use your own ideas to create a design. The diameter of the drum is 19" and the outside circumference, and therefore the image dimensions, is roughly 60". However, you only need to design for 30" as the graphic will be used twice to envelop the entire drum. The graphic should be 28" tall. So in conclusion, the graphic dimensions should be 30" Wide by 20" Tall.
(We will not be using the top of the drum at the dealers. Only for shipping.)
There will be 3 Antenna types loaded into these drums. The TMS2, TMS3, TMS4 (2', 3', 4'). They should be referenced somewhere on the graphic.
"Pana-Pacific" should be referenced somewhere on the graphic as well. Not to prominent, but big enough to be noticed.
I've attached images of the rough draft mock up, the picture of the drum, pictures of the antennas (for your reference), and our Pana-Pacific logo.
OUR TARGET AUDIENCE IS:
Truck Dealers / Drivers.
No Files Added